Powerstroke 6.0L
TamerX High Pressure Oil pump
Ford Powerstroke 6.0L 2003-2010
TamerX Offers a full line of high pressure oil pumps and all the other items used in association with the high pressure oil pump. This includeds gaskets,IPR Valves,misc Oring Kits, STC repair kits, Stand Pipes. High Pressure Rail Ball Tube Kits.
Applications:
Ford Powerstroke 6.0L 2003-2004
Ford Powerstroke 6.0L 2005-2010
-
TamerX Engine Oil Pump Repair Kit for Ford Powerstroke 6.0L 2003-10 Navistar VT365 2003-07
TamerX Front Engine Cover Repair
TamerX offers a Revelation repair option for the Ford Powerstroke 6.0L Diesel and the Navistar International VT365. When your lube pump loses the ability to build pressure because of damage in the front engine cover and Gerotor pump. TamerX has the solution.
Key Features:
- Completely eliminates the need to replace the front engine cover
- Reduces labor time by approximately 7 hours
- Stronger than original part
- Restores Engine Oil pressure
Engine Oil Pump Repair Kit
Part# TX-EOP60K
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003-2010
Learn More ↠TX-EOP60K Engine Oil Pump Repair Kit for Ford Powerstroke 6.0L 2003-10 & Navistar VT365 2003-07
Running your Ford Powerstroke 6.0L diesel engine at correct oil pressure levels is critical to ensure efficient operation and to prevent damage to many of its components, including the high-pressure oil pump and diesel fuel injectors. The OEM oil pressure gauge on these trucks actually functions as a switch rather than as a gauge. The oil pressure reading is inaccurate at best. There is also a warning light that denotes low oil pressure, but will not engage until the gauge shows less than 7 PSI of oil pressure. This makes other methods of checking oil pressure on your truck essential.
Over time, a variety of factors can contribute to degradation or damage to the lube pump (Sometimes also referred to as a low-pressure oil pump) front engine cover, and Gerotor pump, thus reducing the level of oil pressure that the pump is able to produce. This is a problem that can create a chain reaction or domino effect of other performance issues and part failures. In addition to providing lubrication to the engine itself, the lube pump is also responsible for supplying oil to the high-pressure oil pump, which in turn supplies the IPR (Injection Pressure Regulator) valve, which drives the diesel fuel injectors.
Any of these parts can sustain damage or suffer from decreased operating efficiency if the amount of oil supplied to them by the lube pump is insufficient.
TamerX Diesel Products has created and patented the perfect time-saving repair option to resolve all these issues and improve your overall engine performance. Our oil pump repair kit (Part# TX-EOP60K) is stronger and more durable than the original equipment, will restore engine oil pressure, and reduces the labor time of the repair by approximately 7 hours. It is a complete kit made in USA and is perfect for do it yourselfers.
In terms of overall price, our lube pump repair kit is comparable to the purchase of a new OEM front engine cover, Gerotor pump, billet cover plate, and crank seal. The real savings come in the form of the increased strength and durability of the parts and the significantly reduced labor time for the repairs.
The TamerX TX-EOP60K Oil Pump Repair Kit includes the following components:
- 1- OEM Gerotor Pump
- 1- OEM Crank Seal
- 1- OEM Cover Seal Gasket
- 1- TamerX Billet Aluminum Cover
- 1- TamerX Steel Pressure Wear Plate
The kit is designed for the following applications:
Make: Ford & Navistar
Models: F250, F350, F450, F550, F650, F750, E350, E450, E550, 4300
Year Range: 2003-2010 (Ford), 2003-2007 (Navistar)
Engines: Ford Powerstroke 6.0L & Navistar VT365
-
High Pressure Oil Pump 2005-2010 Ford Power Stroke Diesel 6.0L International VT365
TamerX High Pressure Oil Pump with IPR Valve
OEM (HPOP): 5C4Z9A543A, 5C4Z9A543AB
OEM (IPR Valve): 1846057C1, CM5126
APPLICATION:
- MAKE: Ford, International/Navistar
- MODEL: Medium Duty Truck or Bus, F250-750, E450-550
- ENGINE: Ford Power Stroke 6.0L, International VT365
- YEAR: 2004-2010
Notes: Includes IPR Valve
Learn More ↠High Pressure Oil Pump
This is a top quality completely remanufactured high-pressure oil pump and IPR valve kit for 2005-2010 Ford Power Stroke 6.0L diesel applications. This is commonly referred to as a "cast iron pump". The high-pressure oil pump creates and maintains oil pressure, allowing your diesel fuel injectors to operate correctly.
Important fitment note for 2004 model year trucks, please verify this before purchasing:
This high pressure oil pump is appropriate for trucks with engine serial numbers after 6,344,943. If your engine serial number is earlier than this, the correct high pressure oil pump for your vehicle will be the TamerX HPOP123X. (Aluminum body) Please note that the best way to verify fitment is to visually confirm which HPOP is currently installed in your vehicle before purchasing.
This is a remanufactured part that has a core return requirement. This means we need your old pump returned. We do not charge for the core at the time of purchase, but please note that returning your core is a condition of activating the 2 year warranty. A return shipping label is included with your pump shipment. When we receive your returned core, the part's warranty is activated and warranty coverage begins.
Application Information:
Make: Ford, International / Navistar
Model: Medium Duty Truck or Bus, F250-750, E450-550
Engine: Ford Power Stroke 6.0L, International VT365
Year: 2005-2010
Warranty Information: 2 Years, 1,000,000 Miles
Shipping: Standard ground shipping is FREE. Expedited options available for additonal cost.
-
High Pressure Oil Pump 2005-2010 Ford Power Stroke 6.0L International VT365
TamerX High Pressure Oil Pump
OEM: 5C4Z9A543A, 5C4Z9A543AB
APPLICATION:
- MAKE: Ford, International/Navistar
- MODEL: Medium Duty Truck or Bus, F250-750, E450-550
- ENGINE: Ford Power Stroke 6.0L, International VT365
- YEAR: 2004-2010
Learn More ↠This is a top quality completely remanufactured high-pressure oil pump for 2005-2010 Ford Powerstroke 6.0L diesel applications. This is commonly referred to as a "cast iron pump". The high-pressure oil pump creates and maintains oil pressure, allowing your diesel fuel injectors to operate correctly.
Important fitment note for 2004 model year trucks, please verify this before purchasing:
This high pressure oil pump is appropriate for trucks with engine serial numbers after 6,344,943. If your engine serial number is earlier than this, the correct high pressure oil pump for your vehicle will be the TamerX HPOP123X. (Aluminum body) Please note that the best way to verify fitment is to visually confirm which HPOP is currently installed in your vehicle before purchasing.
This is a remanufactured part that has a core. This means we need the old part back so we can continue to offer a great price. We do not charge for the core at the time of purchase. A return shipping label is included with the pump. We provide a warranty with our product which is activated when your core is returned to us.
The HP122 comes ready to install. The STC fitting is replaced with the updated one-piece design and is pre-installed and set to the correct position. The kit also includes the gaskets needed for installation.
Application Information:
Make: Ford, Navistar
Model: Medium Duty Truck or Bus, F250-750, E450-550
Engine: Ford Power Stroke 6.0L, International VT365
Year: 2005-2010
Warranty: 2 Years, 1 Million miles (Replacement)
Shipping: Standard ground shipping is FREE -
Diesel High Pressure Oil Pump Ford Powerstroke 6.0L 2003-2004
Diesel High Pressure Oil Pump Part # HPOP123X
OEM4C3Z9A543AARM,1838828C91:
APPLICATION:
- MAKE: Ford
- MODEL: F250,F350,F450.F550
- ENGINE: Powerstroke 6.0L
- YEAR: 2003-2004
CORE:
$300.00 Note: Core Deposit deferred for 30 Days
Learn More ↠Diesel High Pressure Oil Pump
Application:
- Ford Powerstroke 6.0L 2003-2004
- International/Navistar 2003-2004
Part # HPOP123X
FEATURES & BENEFITS
This pump comes with all seal and gaskets need to complete the installation. This a completely re-manufactured High Pressure Oil Pump. All components are cleaned inspected reworked or replaced. This pump is assembled using the highest quality Viton orings.
- Viton seals
- mounting gasket included
- complete diagnostics instruction included
- Made In USA
Warranty:
Free 2 Year 1,000,000 Mile Warranty
-
Diesel High Pressure Oil Pump Cover Gasket Ford Powerstroke 6.0L, Navistar VT275, VT365 2003-2010
Diesel High Pressure Oil Pump Cover Gasket Part # ISK631
OEM:3C3Z-6619-EA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Diesel High Pressure Oil Pump Cover Gasket Part # ISK631
OEM:3C3Z-6619-EA
APPLICATION:
- MAKE: FORD,INTERNATIONAL
- MODEL: F250,F350,F450,E250,E350
- ENGINE: 6.0L POWERSTROKE, VT365
- YEAR:2003-2010
-
Diesel High Pressure Oil Pump Install Kit/ Ford Powerstroke 6.0L/ Navistar VT275/ VT365 2005-2010 Part# ISK858
Diesel High Pressure Oil Pump Install Gasket Kit Part # ISK858
OEM:4C3Z-9B246-F
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Diesel High Pressure Oil Pump Install Gasket Kit
This is a complete gasket kit for the High Pressure oil pump on a Ford Powerstroke or VT365 Navistar produced after 9/2003. This kit is for the cast iron style High pressure Oil pump. This kit is highly recommended if the STC Connector hasn't been updated to the new style.
Features & Benefits
The Original Style STC connector on the Power Stroke 6.0L is a know failure point. If you are working on your truck and see that you have the old style connector this is the kit you would need update your connector. The kit has all the parts need to align the connector in the correct location.
Contents:
- updated STC Connector
- Pump Cover Gasket
- STC Alignment set
- STC Oring
- Pump Mounting Oring
- Turbo Drain Oring
OEM:4C3Z-9B246-F
Warranty:
24 Month 1,000,000 Miles
-
Injector Pressure Regulator, IPR Valve for Ford Powerstroke 6.0L Navistar VT275/ VT365 2004-2010 Part# IPR102
Injector Pressure Regulator (IPR Valve) Part # IPR102
OEM1846057C1,CM5126:
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Injector Pressure Regulator (IPR Valve)
Application:
- Ford Powerstroke 6.0L 2005-2010
- International/Navistar VT365 2004-2007
Part # IPR102
FEATURES & BENEFITS
This IPR Valve comes with all seal and gaskets need to complete the installation. This a completely new and Manufactured to the Highest OEM Specs.
- Viton seals
- mounting gasket included
- Made In USA
Warranty:
Free 2 Year 1,000,000 Mile Warranty
-
MotorCraft IPR Valve for a Ford 4.5L,2006-2010,6.0L 2004-2010 International/Navistar VT275, VT365 2004-2010 Part # CM5126
MotorCraft Fuel Injection Pressure Regulator Part # CM5126APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠National Parts Warehouse has many parts available that are not sold separately by OEMs. Years of experience has identified low cost parts that are frequently the cause of failures with larger fuel system products. Those parts could be easily replaced but OEMs often do not make them available separately, necessitating the purchase of an entire product at much greater expense. has been supplying new and remanufactured fuel system products for decades. Their industry-leading remanufacturing process addresses all common failures in the OEM design. Components that typically cause failures are replaced with new components. Rigorous testing, design changes and upgrades ensure products are always as good, and usually better, than the OEM parts. 's goal with every fuel system product is a longer service life than the OEM part. If you are looking for the highest quality fuel system products in the market today, think ! MotorCraft Fuel Injection Pressure Regulator for a Ford 4.5L,2006-2010,6.0L 2004-2010 International/Navistar VT275, VT365 2004-2010 Part # CM5126
-
IPR Valve Ford Powerstroke 6.0L / International/Navistar VT365 2003-9/2003 Part# IPR110
Injector Pressure Regulator (IPR Valve) Part # IPR110
OEM:3C3Z-9C968-AA, 1839437C95
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003-2004
CORE:
$50.00 Note: Core Deposit deferred for 30 Days
Learn More ↠Injector Pressure Regulator (IPR Valve)
Application:
- Ford Powerstroke 6.0L 2003-2004
- Navistar VT365 2003-2004
Part # IPR110
FEATURES & BENEFITS
This IPR Valve comes with all seal and gaskets need to complete the installation. This a completely re-manufactured to the Highest OEM Specs. All components are cleaned inspected reworked or replaced. This IPR Valve is assembled using the highest quality Viton orings.
- Viton seals
- mounting gasket included
- Made In USA
Warranty:
Free 2 Year 1,000,000 Mile Warranty
-
IPR Valve Seal Kit Ford Powerstroke 6.0L Navistar VT275/ VT365 2004-2010 Part # ISK112
Injector Pressure Regulator Seal Kit (IPR Valve) Part # Isk112
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,E250,E350
- ENGINE: VT275,VT375,Powerstroke 6.0L
- YEAR: 2005-2010
Learn More ↠Fuel Injection Pressure Regulator O-Ring for a Ford Powerstroke 6.0L 2005-2010 International/Navistar VT275 2005-2009 VT365 2004-2010 Part # ISK112
-
Dummy Plug Ford Powerstroke 6.0L/Navistar Maxxforce 5, VT275 VT365 2004-2010
Dummy Plug Part # W302908
OEM:W302908
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Dummy Plug for a Ford Powerstroke 6.0L 2004-2010 International/Navistar Maxforce 7 2010 VT275 2005-2009 VT365 2004-2010 W302908
-
OEM Stand Pipe Dummy Plug Kit-Ford Powerstroke 4.5L,6.0L/Navistar VT365 2004-2010
Stand Pipe & Dummy Plug Kit Part # ISK944
OEM:6E7Z-9A332-B
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Stand Pipe & Dummy Plug Kit for a Ford Powerstroke 4.5L, 6.0L 2004-2010 International VT365 2004-2010 Part # ISK944- Note: for Both Heads
-
OEM Stand Pipe Ford Powerstroke 6.0L Navistar VT365 2003
Stand Pipe Part # 3C3Z-9A332-AA
OEM: 3C3Z-9A332-AA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003
Learn More ↠Stand Pipe for a Ford Powerstroke 6.0L 2003 International VT365 2003 Part # 3C3Z-9A332-AA
-
Oil Rail Ball Tubes-Ford Powerstroke 6.0L 2004-2010/Navistar VT365 2004-2010
Made in USA
High Pressure Oil Rail Ball Tube Kit
TamerX: ISK606KT
OEM: OEM-NA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003-2010
Learn More ↠TamerX High Pressure Oil Rail Ball Tube Kit [Made in USA]
This is a USA Made repair kit for the high pressure oil rail on Ford 6.0L Power Stroke and International/Navistar VT365 applications. This is an exact, direct-fit replacement for the original ball tubes. The included o-rings are upgraded to a Viton material for improved service life.
The ball tubes need to be replaced every time the fuel injectors are replaced. This will considerably improve the service life of the diesel fuel injectors.
This kit includes 4 ball tubes with o-rings and 1 ball tube installation/removal tool, enough to service one cylinder head.
Contents:
- 4 Ball tubes
- 4 Viton o-rings
- 1 installation tool
Application:
Make: Ford, Navistar
Model: E Series, F Series
Year: 2005-2010
Engine: Ford Power Stroke 6.0L, International/Navistar VT365
Part# ISK606KT
-
Diesel High Pressure Oil Pump Fitting Ford Powerstroke 4.5L,6.0L Navistar VT365,VT275 2005-2010 #ISK616
Diesel High Pressure Oil Pump Fitting Part # ISK616
OEM: OEM-NA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2005-2010
Learn More ↠Diesel High Pressure Oil Pump for a Ford 4.5L 2006-2010 6.0L 2004-2010 Part # ISK616
-
High Pressure Oil Rail Repair Tool for 2004-2010 Ford Power Stroke 6.0L, International/Navistar VT275 VT365
Made in USA
High Pressure Oil Rail Ball Tube Repair Tool Part # ISK607
OEM: OEM-NA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003-2004
Learn More ↠Made in USA
TamerX: ISK607
High Pressure Oil Rail Ball Tube Installation/Removal Tool for the following Ford and International applications:
2004-2010 Ford Power Stroke 6.0L
2005-2009 International/Navistar VT275
2004-2010 International/Navistar VT365
-
Complete Oil Rail Ball Tube Kit for 2004-2010 Ford Power Stroke 6.0L / Navistar VT365
Made in USA
TamerX Diesel Products Complete High Pressure Oil Rail Ball Tube Kit for Ford and International 6.0L and VT365
TamerX: TX606-8T
OEM: OEM-NA
APPLICATION:
- MAKE: Ford/Navistar
- MODEL: F250,F350,F450,F550,F650,F750,E350,E450,E550, 4300,
- ENGINE: Powerstroke 6.0L, VT365
- YEAR: 2003-2010
Learn More ↠TamerX Complete High Pressure Oil Rail Ball Tube Kit [Made in USA]
This is a USA Made repair kit for the high pressure oil rail on 2004-2010 Ford 6.0L Power Stroke and International/Navistar VT365 applications. This is an exact, direct-fit replacement for the original ball tubes. The included o-rings are upgraded to a Viton material for improved service life.
The ball tubes need to be replaced every time the fuel injectors are replaced. This will considerably improve the service life of the diesel fuel injectors.
This kit includes 8 ball tubes, 8 o-rings, and 1 ball tube installation/removal tool, everything you need to service both cylinder heads.
Contents:
- 8 Ball tubes
- 8 Viton o-rings
- 1 Installation tool
Application:
Make: Ford, International / Navistar
Model: E Series, F Series
Year: 2005-2010
Engine: Ford Power Stroke 6.0L, International/Navistar VT365
TamerX Part # TX606-8T