Powerstroke

Diesel Fuel Injector Seal Kit for a Ford Powerstroke 7.3L 1994-2003 International/Navistar T444E 1994-2004 Part # ISK101

High Pressure Oil Rail Ball Tubes for a Ford Powerstroke 6.0L 2003-2010 Part # ISK500

Fuel Pressure Regulator Billet Valve Cap

Blue Spring Kit

The blue spring kit with updated design billet valve cap offered by TamerX includes all the pieces needed to get your fuel pressure regulator valve cap back in service with no leaks. We only supply the highest quality parts available.  This kit will ensure your fuel is at the optimum pressure.

Contents:

• 1- Billet Aluminum Valve Cap Cover (Updated Design)
• 1- Brass Piston
• 1- Brass piston seal
• 1- regulator bushing seal
• 1- cap cover seal
• 1- Vibro Lok Seal
• 1- Blue Spring

Application:

• Ford Powerstroke 7.3L 1998-2003

Warranty:

Two Year 1,000,000 Miles

Fuel Pressure Regulator Blue Spring Upgrade Kit for Ford 6.0L Powerstroke Applications

Blue Spring Kit

This is the Blue spring kit for a Ford Powerstroke Diesel 6.0L. This blue spring restores fuel pressure to the updated pressure recommended by the OEM. This kit includes all of the items needed to replace the spring.

Contents:

1- Keyhole Gasket

1- Blue Spring

1- Brass Plunger

1- Bolt Kit

1- Cover

1- Set of Viton O-Rings

1- Alignment Shim

1- Plastic Part

Application:

Make: Ford

Model: F250, F350, F450, F550,SuperDuty

Engine: 6.0L Power Stroke

Year: 2003-2007

This kit is easy to install and should take approximately 30 minutes.

Warranty:

Two Year 1,000,000 Miles

Shipping:

Free USPS 

Motorcraft Diesel Fuel Injector Seal Kit Set of 8 - Ford Powerstroke 6.0L & Navistar VT275 2005-2009 VT365 2004-2010 Part# CM-5055-TX8

Alternate/OEM Part Numbers: 3C349U509AB, 3C3Z-9229-AA, CM-5055

• Genuine Motorcraft product
• Includes 8 seal kits to service every diesel fuel injector
• Also Includes 8 TamerX brand top O-Rings not originally included in original Motorcraft set

The TamerX HPOP73MSK High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump.
Our kit includes many components you won't find in other HPOP seal kits on the market today along with a base mounting gasket, STC disconnect tool, and STC fittings. Every part that is included in the service kit can also be purchased from us separately if needed. The included parts are TamerX Part Numbers ISK635, ISK617, ISK795, and TL3.

Kit Contains:

(TamerX Part Number ISK635)
2- Discharge port O-Rings
1- Rear Port Plug O-Ring
1- Non- Serviceable Port O-Ring
1- IPR Valve O-Ring
1- IPR Nut
1- Fill Plug O-Ring
1- Non-serviceable port long threaded repair plug
1- Replacement Check Ball
1- Set of Repair instructions
1- .5ml Thread Sealer (Permatex or Loctite)

(TamerX Part Number ISK617)
2- Diesel High Pressure Oil Pump STC Fittings

(TamerX Part Number TL3)
1- STC Quick Disconnect Tool

(TamerX Part Number ISK795)
1- High Pressure Oil Pump Mounting Gasket

The TamerX HPOP73MSK High Pressure Oil Pump Master Service Kit is suitable for the applications listed below:

Ford Powerstroke 7.3L: 1994-2003
International/Navistar DT466: 1995-2004
International/Navistar T444E: 1995-2004

Warranty:

Two Years 1,000,000 Miles

Shipping: Free

This is a complete diesel fuel injector seal kit good for replacing all seals and O-rings on all eight diesel fuel injectors.

This seal kit is appropriate for the following applications:

MAKE: Ford & Navistar
MODELS: F250, F350, F450, F550, F650, F750, E350, E450, E550, 4300
ENGINES: Power Stroke 7.3L & Navistar T444E
YEARS: 1994-2004

Warranty: 12 Months Unlimited Mileage

Fuel Pressure Regulator Cover Gasket for a Ford Powerstroke 6.0L 2003-2010 Part # ISK814

The TamerX ISK635 High Pressure Oil Pump Seal Kit includes all the components needed to get your pump back in service and leak-free quickly and correctly to minimize your truck's downtime.
TamerX only supplies the highest quality repair parts available. Our kit also includes many components you won't find in other HPOP seal kits on the market today.

Kit Contains:

2- Discharge port O-Rings
1- Rear Port Plug O-Ring
1- Non- Serviceable Port O-Ring
1- IPR Valve O-Ring
1- IPR Nut
1- Fill Plug O-Ring
2- Internal Teflon O-Rings & Wire Latches for STC Fittings
1- Non-serviceable port long threaded repair plug
1- Replacement Check Ball
1- Set of Repair instructions
1- .5ml Thread Sealer (Permatex or Loctite)

The TamerX ISK635 High Pressure Oil Pump Seal Kit is suitable for the applications listed below:

Ford Powerstroke 7.3L: 1994-2003
International/Navistar DT466: 1995-2004
International/Navistar T444E: 1995-2004

Warranty:

Two Years 1,000,000 Miles

Shipping: Free

Diesel Fuel Injector Seal Kit for a Ford Powerstroke 6.0L 2003-2008 International/Navistar VT275 2005-2009 VT365 2004-2010 Part # ISK102

Diesel Fuel Injector Seal Kit for a Ford Powerstroke 6.4L 2008-2008 International/Navistar Maxforce 7 2010 Part # ISK103

Injector Pressure Regulator Seal Kit (IPR Valve Seal Kit)

Application:

• Ford Powerstroke   7.3L       1995-2003
• International         T444E       2003-2004
• International        DT466E     1996-2004
• Caterpillar            3126          1995-2004

Part # ISK104

FEATURES & BENEFITS

This IPR Valve seal kit comes with all seal and gaskets need to complete the installation.  This IPR Valve seal kit is assembled using the highest quality Viton orings.

• Viton seals
•  mounting gasket included
•  Made In USA

Warranty:

Free 2 Year 1,000,000 Mile Warranty

Fuel Injection Pressure Regulator O-Ring for a Ford Powerstroke 6.0L 2005-2010 International/Navistar VT275 2005-2009 VT365 2004-2010 Part # ISK112

FUEL BOWL /FILTER RESEAL KIT for a Ford Powerstroke 7.3L 1998-2003 Part # ISK601

FUEL LINE SLEEVE KIT for a Ford Powerstroke 7.3L 1998-2003 Part # ISK602 Features & Benefits This a a set of Viton Fuel Line sleeves for the Ford Power Stroke 7.3L and the International T444E Diesel Engine. This kit may be needed when the fuel filter Housing is removed. Reusing old Vibro Lok Seals almost always results in leaks. Contents: 2-60VLV-4 1/4 Seal 1-60VLV-5 5/15 Seal 1-60VLV-6 3/8 Seal

Fuel Filter Housing Seal Kit for a Ford Powerstroke 7.3L 1994-1997 Part # ISK624

Engine Crankcase Vent O-Ring for a Ford Powerstroke 6.0L 2003-2010 Part # ISK630