HFCM Water Separator 90° Drain Plug and Test Port for Ford Powerstroke 6.0L Diesel Part# HFCM-SV-90

$29.95
In stock

TamerX HFCM Water Separator 90° Drain Plug & Test Port- Ford Powerstroke 6.0L Diesel- Ford Powerstroke 6.0L Diesel Part# HFCM-SV-90

TamerX HFCM Water Separator 90° Drain Plug & Test Port- Ford Powerstroke 6.0L Diesel- Ford Powerstroke 6.0L Diesel Part# HFCM-SV-90

This is a Service tool used to check for a fuel restriction. This tool is used with a vacuum gauge to determine if your fuel system has a blockage.

This is a HFCM drain valve for a Ford Powerstroke 6.0 Diesel. The 90 Degree fitting allows for complete drainage of water from the HFCM.

Ford recommends draining the HFCM on a monthly basis. If you are using the OEM filter, it has a special water block media rap that collects the water as it passes through the system. Once the filter is full, it can no longer trap the water, allowing water to start damping your fuel system, especially your very expensive diesel injectors.

This fitting can also be used to check for a blockage in your fuel system.Connect a vacuum gauge to the fuel pressure port.If you draw more than 5 inches of vacuum, there is a restriction in the tank.

Contents:

1- HFCM Drain Plug

1- Fuel Rated Schrader Valve

More Information
Part NumberHFCM-SV-90
1.Machined from solid brass to eliminate any possibility of corrosion
2.Simplifies the HFCM water drainage process
3.Fuel Rated Schrader Valve
4.Allows for testing of fuel system for blockage
MakeFord
ModelF250, F350, F450, F550, E350, E450
Year Range2003-2007
EngineFord Power Stroke Diesel 6.0L
OEM Number6E7Z-9C082-A
Product TypeFuel Filter Drain Plug
Warranty2 Year 1,000,000 Miles
Item ReturnsThis item can be returned
Write Your Own Review
You're reviewing:HFCM Water Separator 90° Drain Plug and Test Port for Ford Powerstroke 6.0L Diesel Part# HFCM-SV-90
Your Rating