High pressure oil pumps

Diesel High Pressure Oil Pump for a International/Navistar VT275 2005-2009

Diesel High Pressure Oil Pump for a Caterpillar 7.2 C7 Part # 20R0820

High Pressure Oil Pump

This is a top quality completely remanufactured high-pressure oil pump and IPR valve kit for 2005-2010 Ford Power Stroke 6.0L diesel applications. This is commonly referred to as a "cast iron pump". The high-pressure oil pump creates and maintains oil pressure, allowing your diesel fuel injectors to operate correctly.

Important fitment note for 2004 model year trucks, please verify this before purchasing:

This high pressure oil pump is appropriate for trucks with engine serial numbers after 6,344,943. If your engine serial number is earlier than this, the correct high pressure oil pump for your vehicle will be the TamerX HPOP123X. (Aluminum body) Please note that the best way to verify fitment is to visually confirm which HPOP is currently installed in your vehicle before purchasing.

This is a remanufactured part that has a core return requirement. This means we need your old pump returned. We do not charge for the core at the time of purchase, but please note that returning your core is a condition of activating the 2 year warranty. A return shipping label is included with your  pump shipment. When we receive your returned core, the part's warranty is activated and warranty coverage begins.

Application Information:

Make: Ford, International / Navistar

Model: Medium Duty Truck or Bus, F250-750, E450-550

Engine: Ford Power Stroke 6.0L, International VT365

Year: 2005-2010

Warranty Information: 2 Years, 1,000,000 Miles

Shipping: Standard ground shipping is FREE. Expedited options available for additonal cost.

This is a top quality completely remanufactured high-pressure oil pump for 2005-2010 Ford Powerstroke 6.0L diesel applications. This is commonly referred to as a "cast iron pump". The high-pressure oil pump creates and maintains oil pressure, allowing your diesel fuel injectors to operate correctly.

Important fitment note for 2004 model year trucks, please verify this before purchasing:

This high pressure oil pump is appropriate for trucks with engine serial numbers after 6,344,943. If your engine serial number is earlier than this, the correct high pressure oil pump for your vehicle will be the TamerX HPOP123X. (Aluminum body) Please note that the best way to verify fitment is to visually confirm which HPOP is currently installed in your vehicle before purchasing.

This is a remanufactured part that has a core. This means we need the old part back so we can continue to offer a great price. We do not charge for the core at the time of purchase. A return shipping label is included with the pump. We provide a warranty with our product which is activated when your core is returned to us.

The HP122 comes ready to install. The STC fitting is replaced with the updated one-piece design and is pre-installed and set to the correct position. The kit also includes the gaskets needed for installation.

Application Information:

Make: Ford, Navistar

Model: Medium Duty Truck or Bus, F250-750, E450-550

Engine: Ford Power Stroke 6.0L, International VT365

Year: 2005-2010

Warranty: 2 Years, 1 Million miles (Replacement)

Shipping: Standard ground shipping is FREE

Diesel IPR Valve for International/Navistar MaxxForce 9, MaxxForce 10, and MaxxForce DT applications

OEM: 1889325C95, 3036669C91, 7092991C1

Includes wiring pigtail with connector

Applications:

2011-2015 International MaxxForce 9 Engine

2011-2015 International MaxxForce 10 Engine

2011-2015 International MaxxForce DT Engine

Diesel IPR Valve for a International/Navistar MAXXFORCE DT , 9 , 10 OEM# 1878571C95

Diesel IPR Valve for a International/Navistar MAXXFORCE DT , 9 , 10 OEM# 1842428C98

Oil Rail Pucks

OEm# 1841923C98

Application:

Make: Navistar

Model: 4400, 4900,4300

Year: 2004-2015

Engine: Maxxforce DT, 9,10 Dt466E

Part#  1841923C98

10R4357, 10R8899, 20R6642 Diesel HEUI Injection Pump for Caterpillar 7.2L C7

Diesel High Pressure Oil Pump Fitting Kit for a Ford Powerstroke 7.3L 1999-2003 International/Navistar T444E 1999-2004 Part # F81Z9N332AA Cylinder Head fitting

Diesel IPR Valve for a International/Navistar DT466 2004-2007 MAXXFORCE DT 2008 Part # IPR115

Retrofit Kit

High Pressure oil Pump

This is an update Navistar introduced as a measure to improve the life of the high pressure oil pump.  This kit is easy to install and comes with installation instructions.

Application:

Make: International Navistar

Engne: MaxxForce DT, 9, 10 N9 N10

Year:  2004-2015

Geniune Navistar GEO Rotor Pump Kit

TamerX Diesel High Pressure Oil Pump with IPR Valve and STC Disconnect Tool Part# HPOP008XIPR

Application:

• Ford Powerstroke 7.3L 1999-2003
• International/Navistar T444E 1999-2004

Part# HPOP008XIPR

Package Includes:

1- HPOP008X High Pressure Oil Pump

1- ISK795 Mounting Gasket

1- IPR101 IPR Valve

1- ISK104 IPR Valve Seal Kit

1- TL3 Oil Line STC Disconnect Tool

All high pressure oil pumps offered by TamerX are fully factory remanufactured in the USA and are backed by our 2 year, 1 million mile replacement warranty.

• The HPOPs are disassembled and all parts are examined for wear
• All running surfaces are ground and polished back to original new condition
• The casting body is re-surfaced and bead blasted
• Any parts that cannot be brought back to original specs are replaced
• New bearings, bushings and seals are installed
• Unit is reassembled and bench tested for pressure, volume of oil output, and leakage

FEATURES & BENEFITS

This pump comes with all seal and gaskets need to complete the installation. This a completely remanufactured high pressure oil pump. All components are cleaned, inspected, and  reworked or replaced. This pump is assembled using the highest quality Viton o-rings.

•  Viton seals
•  STC fittings included
•  Mounting gasket included
•  Complete diagnostics instructions included
•  Made In USA

Warranty:

Free 2 Year 1,000,000 Mile Warranty

TamerX Diesel High Pressure Oil Pump and IPR Valve Package Part# HPOP005XIPR

Application:

• Ford Powerstroke 7.3L 1996-1997
• International/Navistar T444E 1996-1997

Part# HPOP005XIPR

 Package Includes:

1- HPOP005X High Pressure Oil Pump

1- ISK795 Mounting Gasket

1- IPR101 IPR Valve

1- ISK104 IPR Valve Seal Kit

All high pressure oil pumps offered by TamerX are fully factory remanufactured in the USA and are backed by our 2 year, 1 million mile replacement warranty.

• The HPOPs are disassembled and all parts are examined for wear
• All running surfaces are ground and polished back to original new condition
• The casting body is re-surfaced and bead blasted
• Any parts that cannot be brought back to original specs are replaced
• New bearings, bushings and seals are installed
• Unit is reassembled and bench tested for pressure, volume of oil output, and leakage

FEATURES & BENEFITS

This pump comes with all seals and gaskets needed to complete the installation. This a completely remanufactured High Pressure Oil Pump. All components are cleaned, inspected, and reworked or replaced. This pump is assembled using the highest quality Viton orings.

•  Viton seals
•  Fittings included
•  Mounting gasket included
•  Complete diagnostics instruction included
•  Made In USA

Warranty:

Free 2 Year 1,000,000 Mile Warranty

TamerX Diesel High Pressure Oil Pump and IPR Valve Package Part# HPOP005XIPR

Application:

• Ford Powerstroke 7.3L 1998-1999
• International/Navistar T444E 1998-1999

Part# HPOP007XIPR

 Package Includes:

1- HPOP007X High Pressure Oil Pump

1- ISK795 Mounting Gasket

1- IPR101 IPR Valve

1- ISK104 IPR Valve Seal Kit

All high pressure oil pumps offered by TamerX are fully factory remanufactured in the USA and are backed by our 2 year, 1 million mile replacement warranty.

• The HPOPs are disassembled and all parts are examined for wear
• All running surfaces are ground and polished back to original new condition
• The casting body is re-surfaced and bead blasted
• Any parts that cannot be brought back to original specs are replaced
• New bearings, bushings and seals are installed
• Unit is reassembled and bench tested for pressure, volume of oil output, and leakage

FEATURES & BENEFITS

This pump comes with all seals and gaskets needed to complete the installation. This a completely remanufactured High Pressure Oil Pump. All components are cleaned, inspected, and reworked or replaced. This pump is assembled using the highest quality Viton orings.

•  Viton seals
•  Fittings included
•  Mounting gasket included
•  Complete diagnostics instruction included
•  Made In USA

Warranty:

Free 2 Year 1,000,000 Mile Warranty

High Pressure Oil Rail seal kit for a Navistar DT466, Maxxforce DT,9,10 Part# ORS25

Diesel High Pressure Oil Pump

OEM Reference

1885043C92, 1885044C2, 1889323C93, 5010736R91, 5010755R92

This is a High Pressure oil Pump that supplies high pressure engine motor oil to the HEUI Diesel injectors. This is a Geniune International part Manufactured by Sheppard Manufacturing Company.

Application:

• Year Range: 2011-2017
• Engine: MAxxforce DT
• ESN Range: 3,300,001 and UP

Warranty: 1,000,000 Miles or 1 Year

TamerX Diesel Products, LLC

3830 Hemingway, Highway

Hemingway, SC  29554

843-933-3050

Diesel High Pressure Oil Pump for a Caterpillar 7.2 C7 Part # 10R8897 OEM# 10R7145 10R6329 10R8897 10R2981 204-4944 232-3911 254-4355 295-4775 304-0675 312-0675 319-0675