EGR Coolers and Valves

EGR Cooler Insert Kit [High Temp Side]

OEM# 2513445C91

This is a high temperature side heavy duty designed EGR cooler insert kit for International/Navistar trucks equipped with the MaxxForce 13 diesel engine. The difference is in the flex tube design. The flex tube design can withstand more thermal flex than the OEM EGR cooler design.

The design of the EGR cooler uses thermal compensating tubes that utilize bend and flex tube technology. The bend and flex technology can withstand the thermal fatigue high heat cycles and the thermal shock demanded by the engines of long haul trucks.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2015

Warranty:  One year - 1,000,000 Miles (Replacement)

Shipping: UPS Next Day Air available for between $65-$95 (Depending on location)

This is an OEM Navistar International Temperature Sensor for the 2011-2014 EPA 2010 Certified Diesel Engine. The Sensor is also used as the EGR and Turbo Charger Outlet Temperature Sensor. The sensor is located on the Turbo Housing and the Low Temperature EGR Housing.

EGR Cooler Assembly

[Low Temp Side]

OEM# 2511089C91

Application Information:

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year: 2014

Warranty:  One year - 1,000,000 Miles

Shipping: UPS expedited Next Day Air available for approximately $150.00 (Depending on location)

Oil Cooler Kit for 2011-2014 Navistar International MaxxForce 7

OEM: 1891672C94

This is an Oil Cooler Kit for MaxxForce 7 applications. It includes the oil cooler and installation gasket kit. It is appropriate for the following:

Make: International/Navistar

Model: 4300, Durastar

Engine: MaxxForce 7

Year Range: 2011-2013

Warranty: This part carries a warranty of one year with no mileage limitation.

Navistar International This is a OEM International EGR inlet Tube. Location: connects hot exhaust from cylinder 4-6 to the EGR Valve. Application: Make: Navistar International Engine: Maxxforce 11, 13 Year: 2011-2014

EGR Cooler Insert Kit [Low Temp Side]

OEM# 2513209C91

This is a low temperature side heavy duty designed EGR cooler insert kit for International/Navistar trucks equipped with the MaxxForce 13 diesel engine. The difference is in the flex tube design. The flex tube design can withstand more thermal flex than the OEM EGR cooler design.

The design of the EGR cooler uses thermal compensating tubes that utilize bend and flex tube technology. The bend and flex technology can withstand the thermal fatigue high heat cycles and the thermal shock demanded by the engines of long haul trucks.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2015

Warranty:  One year - 1,000,000 Miles

Shipping: UPS Next Day Air available for between $65-$95 (Depending on location)

EGR Valve

OEM# 2514164C92

T

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: N13, N11

Year:  2016-2017

Warranty:  One year - 1,000,000 Miles

Shipping: UPS expedited Next Day Air available for approximately $150.00 (Depending on location)

EGR Cooler Assembly

OEM# 2514206C92, 5010855R91

T

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: N13, N11

Year:  2016-2017

Warranty:  One year - 1,000,000 Miles

Shipping: UPS expedited Next Day Air available for approximately $150.00 (Depending on location)

This is an EGR valve gasket kit for 2011-2014 International trucks equipped with MaxxForce 11 and MaxxForce 13 engines. The kit includes all pictured gaskets, o-rings, and hardware.

TamerX: EGR696GKT

This EGR Valve is appropriate for the following applications:

Make:    International / Navistar

Model:   ProStar

Engine: MaxxForce 11, MaxxForce 13

Years:    2011-2014

Notes:    2010 EPA Emissions

Warranty: One Year, 1,000,000 Miles

EGR Cooler Gasket Kit [Low Temp Side]

TamerX# EGR209GKT

This is a low temperature side EGR cooler gasket kit for 2011-2015 International trucks equipped with the MaxxForce 11 and MaxxForce 13 engines. Kit includes all pictured gaskets, o-rings, and hardware.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2015

Warranty:  One year - 1,000,000 Miles

Shipping: Standard ground shipping is free

EGR Cooler Gasket Kit [High Temp Side]

TamerX# EGR445GKT

This is a high temperature side EGR cooler gasket kit for 2011-2015 International trucks equipped with the MaxxForce 11 and MaxxForce 13 engines. Kit includes all pictured gaskets, o-rings, and hardware.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2015

Warranty:  One year - 1,000,000 Miles

Shipping: Standard ground shipping is free

EGR Cooler Insert Kit [Low Temp Side]

OEM# 2513209C91

This is a low temperature side heavy duty designed EGR cooler insert kit for International/Navistar trucks equipped with the MaxxForce 13 diesel engine. The difference is in the flex tube design. The flex tube design can withstand more thermal flex than the OEM EGR cooler design.

The design of the EGR cooler uses thermal compensating tubes that utilize bend and flex tube technology. The bend and flex technology can withstand the thermal fatigue high heat cycles and the thermal shock demanded by the engines of long haul trucks.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2015

Warranty:  One year - 1,000,000 Miles

Shipping: UPS Next Day Air available for between $65-$95 (Depending on location)

This is a OEM International Navistar EGR Valve kit. The kit includes all gaskets necessary for installation.

OEM: 5010918R92

This EGR Valve is appropriate for the following applications:

Make:    International

Model:   Pro Star

Engine: Maxxforce 11, Maxxforce 13

Years:    2014-2015

Notes:    2014 EPA Emissions

Warranty: One Year, 1,000,000 Miles

Navistar/International MaxxForce 15 EGR Valve Part # 3008008C92

OEM: 3008008C92, 3016004C91

EGR Cooler Assembly

[High Temp Side]

OEM# 3014354C96, 3014481C1, 5010689R92

This is a high temperature side heavy duty design EGR cooler housing and insert kit for International/Navistar trucks equipped with the MaxxForce 11 and MaxxForce 13 diesel engines. The difference is in the flex tube design. The flex tube design can withstand more thermal flex than the OEM EGR cooler design.

The design of the EGR cooler uses thermal compensating tubes that utilize bend and flex tube technology. The bend and flex technology can withstand the thermal fatigue high heat cycles and the thermal shock demanded by the engines of long haul trucks.

 Application Information: 

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2014

Warranty:  One year - 1,000,000 Miles

Shipping: UPS expedited Next Day Air available for approximately $150.00 (Depending on location)

EGR Cooler Assembly

[Low Temp Side]

OEM# 3015862C94, 2511089C91

This is a low temperature side heavy duty designed EGR cooler housing and insert kit for International/Navistar trucks equipped with MaxxForce 11 MaxxForce 13 diesel engines. The difference is in the flex tube design. The flex tube design can withstand more thermal flex than the OEM EGR cooler design.

The design of the EGR cooler uses thermal compensating tubes that utilize bend and flex tube technology. The bend and flex technology can withstand the thermal fatigue from high heat cycles and the thermal shock demanded by the engines of long haul trucks.

Application Information:

Make: Navistar / International

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year:  2011-2014

Warranty:  One year - 1,000,000 Miles

Shipping: UPS expedited Next Day Air available for approximately $150.00 (Depending on location)

OEM Valve Assembly Coolant control for 2011-2015 Navistar International MaxxForce 11 13

OEM: 3014157C91

This is an OEM  Coolant Flow Control Valve for MaxxForce 11 and MaxxForce13 applications. It is appropriate for the following:

Make: International/Navistar

Model: ProStar

Engine: MaxxForce 11, MaxxForce 13

Year Range: 2011-2015

Warranty: This part carries a warranty of one year with no mileage limitation.

OEM Coolant Flow Control Valve for 2011-2015 Navistar/International MaxxForce 15

OEM: 3014157C91

This is an OEM  Coolant Flow Control Valve for MaxxForce 15 applications. It is appropriate for the following:

Make: International/Navistar

Model: ProStar

Engine: MaxxForce 15

Year Range: 2011-2015

Warranty: This part carries a warranty of one year with no mileage limitation.

EGR Valve Kit

OEM# 3016004C92

 This is a Heavy Duty OEM Navistar EGR Cooler Kit for a Pro Star International/Navistar truck with the Maxxforce 15  Diesel Engine.

Contents:

1 EGR Valve Assembly

Application: 

Make: Navistar / International

Model: Pro Star

Engine: MaxxForce 15

Year:  2011-2014

Warranty:  One year 1,000,000 Miles