T444E

Diesel Fuel Injector for a Navistar DT466,DT466E, 2000 Part Number DE520

National Parts Warehouse has many parts available that are not sold separately by OEMs. Years of experience has identified low cost parts that are frequently the cause of failures with larger fuel system products. Those parts could be easily replaced but OEMs often do n

National Parts Warehouse has many parts available that are not sold separately by OEMs. Years of experience has identified low cost parts that are frequently the cause of failures with larger fuel system products. Those parts could be easily replaced but OEMs often do n

New Water Pump for a Ford Powerstroke 7.3L 2004-2004 Part # WP204

TURBO NAVISTAR T444E TRUCK CHASSIS 2000-2003 OEM# 1831775C92

The injection control pressure sensor (ICP) is a variable sensor when supplied with a 5-volt reference signal from the PCM, produces a linear analog voltage signal that indicates oil pressure in the high pressure oil pump on the 7.3L DIT diesel engine. The ICP sensor provides a feedback signal to indicate high oil pressure so that the PCM can command the correct injector timing, pulse width and injection control pressure for proper fuel delivery at all speed and load conditions. Fuel Injection Pressure Sensor (ICP) for a Ford Powerstroke 7.3L 1994-2003 International/Navistar T444E 1994-2004 Part #ISK730

Coolant Temp Sensor for a Ford Powerstroke 6.0L 2003-2010 International/Navistar MAXXFORCE 10 2008-2009 MAXXFORCE DT 2008-2012 VT365 2004-2010 Part # ISK931

Coolant Temp Sensor for a Chevrolet/GMC 6.6L 2001-2014 Part # ISK956

Diesel Glow Plug SET for a Ford Powerstroke 7.3L 1995-2003 International/Navistar T444E 1994-2004 Part # GP138-8

Fuel Injection Harness Connector for a Ford Powerstroke 7.3L 1994-1997 Part # ISK869

National Parts Warehouse has many parts available that are not sold separately by OEMs. Years of experience has identified low cost parts that are frequently the cause of failures with larger fuel system products. Those parts could be easily replaced but OEMs often do not make them available separately, necessitating the purchase of an entire product at much greater expense. has been supplying new and remanufactured fuel system products for decades. Their industry-leading remanufacturing process addresses all common failures in the OEM design. Components that typically cause failures are replaced with new components. Rigorous testing, design changes and upgrades ensure products are always as good, and usually better, than the OEM parts. 's goal with every fuel system product is a longer service life than the OEM part. If you are looking for the highest quality fuel system products in the market today, think ! MotorCraft Glow Plug for a Ford 7.3L 1995-2003 International/Navistar T444E 1994-2004 Part # ZD11

 has many parts available that are not sold separately by OEMs. Years of experience has identified low cost parts that are frequently the cause of failures with larger fuel system products. Those parts could be easily replaced but OEMs often do not make them available separately, necessitating the purchase of an entire product at much greater expense. has been supplying new and remanufactured fuel system products for decades. Their industry-leading remanufacturing process addresses all common failures in the OEM design. Components that typically cause failures are replaced with new components. Rigorous testing, design changes and upgrades ensure products are always as good, and usually better, than the OEM parts. 's goal with every fuel system product is a longer service life than the OEM part. If you are looking for the highest quality fuel system products in the market today, think ! This MAP Sensor fits a Ford 7.3L 1995-1998

Glow Plug Module for a Ford Powerstroke 6.0L 2003-2010, 6.4L 2008-2010, 7.3L 1999-2003 International/Navistar Maxforce 7 2010 T444E 1999-2004, VT275 2005-2009, VT365 2004-2010 Part # GPM1

New Water Pump International/Navistar T444E 1994-2004 International T444E 1994-2004 Part #WP209

Turbo Inlet V Band Clamp Ford Powerstroke 6.0L 2003-2010, 7.3L 1998-2003 Part # TBO2562

National Parts Warehouse has many parts available that are NEW and meet or exceed OEM specifications. Many OEMs often do not make these parts available separately except directly from the OEM, necessitating the purchase of an entire product at much greater expense. Our years of experience has enabled us to realize efficient pricing for parts that are frequently the cause of failures with larger fuel system products. has been supplying new and remanufactured fuel system products for decades. Their industry-leading remanufacturing processes address all common failures found in OEM products. Parts that typically cause failures are replaced with new parts. Rigorous testing and constant design improvements ensure products are always at least as good as OEM parts. 's goal with every fuel system product is a longer service life than the OEM product typically provides. If you are looking for the highest quality fuel system products in the market today, think ! Fuel Injection Harness Connector for a Ford 7.3L International/Navistar T444E 1998-2003 Part # ISK866

(IDM) Injector Driver Module Navistar International T444E IDM 1995-1998 Part# IDM248

STC Release Tool

This is the tool most Professional Mechanics use to Remove the lines from the High Pressure Oil System On the Ford Powerstroke Diesel. The lines use a special connection called Snap To Connect (STC). This is a high Quality to made to last a lifetime.

This tool is specifically used to remove the Oil line from the High Pressure Pump and the Oil supply on the Ford Powerstroke 6.0L, 7.3L Navistar VT365,VT275 Engines

Application:

• Make: Ford, Navistar International/Navistar
• Model: F-Series, Eseries, Mid Range Trucks
• Engines: Powerstroke 6.0L,Powerstroke 7.3L, T444e, VT365, VT275
• Year: 1995-2010

Features:

• STC Disconnect
• Steel Construction
• Easy to use

Diesel Specialists 7.3L Diesel Injector DE501-8

"Industry Leading Quality"

This is a Factory Re-Manufactured Diesel Injector set of 8 Injectors. The high pressure fuel injectors in the ford Powerstroke 7.3L diesel engine controls the delivery of fuel precisely into the combustion chamber. These are HEUI  injector designed by Caterpillar for ford Powerstroke 7.3L and the T444E Navistar International Engines. The design uses high pressure engine motor oil to create the mechanical force to atomize the fuel.

Features of the Diesel Specialists 7.3L diesel injector include the following:

• Replacement of the entire coil assembly as needed and 100 percent of the wire and connector,
• High pressure sealing surfaces are refinished to OE Specifications (less than 2 microns) to insure long injector life,Injector
• intensifier bodies are precision honed to seal properly,
• 100% of spool valves are replaced with new parts. Both control valve bodies and spools are precision ground to exacting tolerances for exceptional sealing and oil direction
• 100% of Nozzles are flow tested for proper flow or replaced with new,
• Re-Manufacturing process done in a clean room environment

Warranty: 12 month 500,000 mile warranty

Before Buying!!

We want our customer to be totally satisfied with their purchase.  We offer a industry leading warranty of 24 months 1,000,000 mile warranty. Before you make the decision to purchase 8 injectors we recommend  checking a few things first.

Check List

• confirm fuel pressure 60-70 psi
• confirm low pressure oil pressure 30 psi or higher
• confirm IDM voltage 110 volts
• make sure fuel filters are not restricted
• make sure engine oil at proper level
• check battery voltage

If any of these items are not up to standard your engine will not operate correctly.  If you purchase new injectors and dont correct these issues you may not be happy with your new purchase.  We don't want this to be the situation.  The items in the check list are the most common reasons the 7.3L Diesel has issues

Additional Resources:

1. Fuel Pressure regulator Blue Spring Kit Part #ISK641