Ford & International/Navistar

High Pressure Oil Rail for a Ford Powerstroke 6.0L 2005-2010 International/Navistar VT275 2005-2009 VT365 2004-2010 Part #HPR3

This is a billet aluminum fuel filter cap. This is a great replacement for the original plastic cap This billet aluminum cap is made here in the United States.

Replaces OEM Part Number 3C3Z-9G270-BA

Works with these applications:

Make:   Ford
Model:  F-Series, E-Series
Engine: Powerstroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·Billet aluminum fuel filter cap

This is a billet aluminum oil filter cap. Great looks and increased durability make this a great replacement for the original plastic cap.This billet aluminum cap is made here in the United States.

Works with these applications:

Make:   Ford
Model:  F-Series Super Duty
Engine: Powerstroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·Billet aluminum oil filter cap

This is a billet aluminum fuel filter and oil filter cap package. Both caps include a built-in Schrader valve test ports for accurate reading of oil and fuel pressure, respectively. Great looks and increased durability, plus the added ability to accurately read your oil and fuel pressure make these great replacements for the original OEM plastic caps.These billet aluminum caps are made here in the United States.

Because the diesel fuel cools and lubricates the injectors on the 6.0L engine, operating the vehicle within recommended fuel pressure specifications (approximately 65psi or greater) is critical. Fuel pressure is one of the first things that should be checked when driveability issues occur. The oil pressure on the Powerstroke 6.0L is also very Important because the lube pump pressure supplies the high pressure oil pump with oil. Without proper pressure in the system, many other components will begin to fail.

Running your Ford Powerstroke 6.0L diesel engine at correct oil pressure levels is critical to ensure efficient operation and to prevent damage to many of its components, including the high-pressure oil pump and diesel fuel injectors. The OEM oil pressure gauge on these trucks actually functions as a switch rather than as a gauge. The oil pressure reading is inaccurate at best. There is also a warning light that denotes low oil pressure, but will not engage until the gauge shows less than 7 PSI of oil pressure. This makes other methods of checking oil pressure on your truck essential.

Works with these applications:

Make:   Ford
Model:  F-Series Super Duty
Engine: Powerstroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·1 Billet aluminum fuel filter cap

·1 Billet aluminum oil filter cap

·2 Solid brass Schrader valve test ports

TamerX HFCM Water Separator Drain Plug w/ Integrated Test Port for Ford Powerstroke 6.0L Diesel Part# HFCM-TP

This is a HFCM (Horizontal Fuel Conditioning Module) drain plug for a Ford Powerstroke 6.0 Diesel applications. It is made in USA of solid brass to eliminate any possibilty of corrosion. It is much easier to remove and replace than the OEM drain plug and also features a built-in Schrader valve test port that can be used with a hose and gauge to test for possible obstructions in the fuel system. (Connect a vacuum gauge to the fuel pressure port.If you draw more than 5 inches of vacuum, there is a restriction in the tank.)

Ford recommends draining the HFCM on a monthly basis. If you are using the OEM filter, it has a special water block media rap that collects the water as it passes through the system.  Once the filter is full, it can no longer trap the water, allowing water to start damping your fuel system, especially your very expensive diesel injectors.

Contents:

1- HFCM Drain Plug with Integrated Fuel Rated Schrader Valve

Shipping: Fast, Free USPS shipping

Compatible with the following applications:

Make: Ford

Model: F250, F350, F450, F550 Super Duty

Years: 2003-2007

Engine: Power Stroke 6.0L

This is a billet aluminum fuel filter cap, oil filter cap, and oil filler cap package. Both filter caps include a built-in Schrader valve test ports for accurate reading of oil and fuel pressure, respectively. Great looks and increased durability, plus the added ability to accurately read your oil and fuel pressure make these great replacements for the original OEM plastic caps.These billet aluminum caps are made here in the United States.

Because the diesel fuel cools and lubricates the injectors on the 6.0L engine, operating the vehicle within recommended fuel pressure specifications (approximately 65psi or greater) is critical. Fuel pressure is one of the first things that should be checked when driveability issues occur. The oil pressure on the Powerstroke 6.0L is also very Important because the lube pump pressure supplies the high pressure oil pump with oil. Without proper pressure in the system, many other components will begin to fail.

Running your Ford Powerstroke 6.0L diesel engine at correct oil pressure levels is critical to ensure efficient operation and to prevent damage to many of its components, including the high-pressure oil pump and diesel fuel injectors. The OEM oil pressure gauge on these trucks actually functions as a switch rather than as a gauge. The oil pressure reading is inaccurate at best. There is also a warning light that denotes low oil pressure, but will not engage until the gauge shows less than 7 PSI of oil pressure. This makes other methods of checking oil pressure on your truck essential.

Works with these applications:

Make:   Ford
Model:  F-Series Super Duty
Engine: Powerstroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·1 Billet aluminum fuel filter cap

·1 Billet aluminum oil filter cap

·1 Billet aluminum oil filler cap

·2 Solid brass Schrader valve test ports

This is a billet aluminum fuel filter cap, oil filter cap, and oil filler cap package. Great looks and increased durability make these great replacements for the original OEM plastic caps. These billet aluminum caps are USA Made.

Works with these applications:

Make:   Ford
Model:  F-Series Super Duty
Engine: Powerstroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·1 Billet aluminum oil filler cap

·1 Billet aluminum fuel filter cap

·1 Billet aluminum oil filter cap

Diesel Fuel Injector Set & High Pressure Fuel Pump Package for 2009-2010 International/Navistar MaxxForce 11 [Pre-2010 Emissions]

OEM: 3005555C91, 3006220C92

Bosch: 0445120179, 62101006123, 0445020080

This is a brand new set of 6 Bosch diesel fuel injectors and 1 Bosch high pressure fuel pump for 2008 to 2010 International/Navistar trucks equipped with MaxxForce 11 engine. TamerX Diesel Products stands behind this part package with a one year, unlimited mileage warranty.

These diesel fuel injectors and high pressure fuel pump fit the following trucks:

• 2009 International 7600, MaxxForce 11
• 2010 International ProStar, MaxxForce 11
• 2009-2010 International 8600 TranStar, MaxxForce 11
• 2009-2010 International WorkStar 7600, MaxxForce 11

Diesel Fuel Injector Set & High Pressure Fuel Pump Package for 2008-2010 International/Navistar MaxxForce 13 [Pre-2010 Emissions]

OEM: 3005556C91, 3006220C92

Bosch: 0445120180, 62101006122, 0445020080

This is a brand new set of 6 Bosch diesel fuel injectors and 1 Bosch high pressure fuel pump for 2008 to 2010 International/Navistar trucks equipped with MaxxForce 13 engines.

TamerX Diesel Products stands behind this part package with a one year, unlimited mileage warranty.

These diesel fuel injectors and high pressure fuel pump fit the following trucks:

• 2008-2010 International ProStar, MaxxForce 13
• 2008-2010 International 8600 TranStar, MaxxForce 13
• 2009-2010 International 7600, MaxxForce 13
• 2009-2010 International WorkStar 7600, MaxxForce 13

Fuel Pressure Regulator Valve Cap

Blue Spring Kit

The blue spring kit with valve cap offered by TamerX includes all the pieces needed to get your fuel pressure regulator valve cap back in service with no leaks. We only supply the highest quality parts available.  This kit will ensure your fuel is at the optimum pressure.

Contents:

• 1- Valve Cap Cover
• 1- Brass Piston
• 1- Brass piston seal
• 1- regulator bushing seal
• 1- cap cover seal
• 1- Vibro Lok Seal
• 1- Blue Spring

Application:

• Ford Powerstroke 7.3L 1998-2003

Warranty:

Two Year 1,000,000 Miles

Fuel Supply Pump

OEM#: 1891305C94

This is an OEM Fuel Pump from International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 9, MaxxForce 10, and MaxxForce DT engines. Specific application information is below.

This fuel pump fits the following trucks:

• 2011 International 3200, MaxxForce DT
• 2015 International 3300, MaxxForce DT
• 2011-2015 International 4300, MaxxForce DT
• 2011-2015 International 4400, MaxxForce 9, 10, DT
• 2011-2015 International 7300, MaxxForce DT
• 2011-2015 International 7400, MaxxForce 9, 10, DT
• 2011-2015 International 7500, MaxxForce 9, 10, DT
• 2015 International 3000RE, MaxxForce DT
• 2011-2015 International 4300LP, MaxxForce DT
• 2011-2015 International 4400LP, MaxxForce 9, 10, DT
• 2011 International 8500 TranStar, MaxxForce 9, 10
• 2015 International Durastar, MaxxForce 9, DT
• 2013 International Loadstar, MaxxForce 10
• 2015 International Traveler, MaxxForce DT
• 2015 International WorkStar 7300, MaxxForce DT
• 2015 International WorkStar 7400, MaxxForce 9

This is an aluminum fuel filter cap. With a handsome silver finish and increased durability, this is a great replacement for the original Ford factory plastic cap. It also features a 15/16" hex head for easy tightening and removal.

Replaces OEM Part Number 3C3Z-9G270-BA

Works with these applications:

Make:   Ford
Model:  F-Series, E-Series
Engine: Power Stroke Diesel 6.0L
Years:   2003-2007

Package Includes:

·1 aluminum fuel filter cap [Silver]

High Pressure Fuel Rail for Ford Power Stroke 6.4L 2008-2010 Part # HPR64-1

This is a factory remanufactured set of high pressure fuel rails (also referred to as "Fuel Supply Manifold") for 2008-2010 Ford Power Stroke 6.4L applications. Set includes both right and left fuel rails.

OEM Part Numbers:

Set: 8C3Z-9T287-CRM, 8C3Z-9T287-CA

Right: 8C3Z-9T287-AA

Left: 8C3Z-9T287-BA

Application Information:

Make:  Ford

Model:  F-250, F-350, F-450, F-550 Super Duty

Engine:  6.4L Power Stroke

Year Range:  2008-2010

Additional Information:

• This set of high pressure fuel rails ships via UPS Ground for free. Call us for availability on expedited shipping options, cost depends on your location.
• This part is backed by the TamerX Diesel Products one year replacement warranty.

Fuel Cooler

OEM Number

2612890C91

This is an origional Navistar International Fuel cooler .  This product carries the fulll Navistar International Nationwide warranty. 

Application

Make:  Navistar International

Model:  Pro Star

Engine:  Maxxforce 11, 13

Year Range:  2011-2015

VIN# DJ16325

Warranty: 1 Year - 1,000,000 Miles

Fuel Filter Housing

OEM#: 1890254C96

This is an OEM Fuel Filter Housing kit for a International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 9, MaxxForce 10, and MaxxForce DT engines. Specific application information is below.

Note: Fuel Pump sold Serparately Part# 1891305C94

This fuel filter housing fits the following trucks:

• 2011 International 3200, MaxxForce DT
• 2015 International 3300, MaxxForce DT
• 2011-2015 International 4300, MaxxForce DT
• 2011-2015 International 4400, MaxxForce 9, 10, DT
• 2011-2015 International 7300, MaxxForce DT
• 2011-2015 International 7400, MaxxForce 9, 10, DT
• 2011-2015 International 7500, MaxxForce 9, 10, DT
• 2015 International 3000RE, MaxxForce DT
• 2011-2015 International 4300LP, MaxxForce DT
• 2011-2015 International 4400LP, MaxxForce 9, 10, DT
• 2011 International 8500 TranStar, MaxxForce 9, 10
• 2015 International Durastar, MaxxForce 9, DT
• 2013 International Loadstar, MaxxForce 10
• 2015 International Traveler, MaxxForce DT
• 2015 International WorkStar 7300, MaxxForce DT
• 2015 International WorkStar 7400, MaxxForce 9

Fuel Filter Housing

OEM#: 1890253C96

This is an OEM Fuel Filter Housing kit for a International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 9, MaxxForce 10, and MaxxForce DT engines. Specific application information is below.

This fuel filter housing fits the following trucks:

• 2011 International 3200, MaxxForce DT
• 2015 International 3300, MaxxForce DT
• 2011-2015 International 4300, MaxxForce DT
• 2011-2015 International 4400, MaxxForce 9, 10, DT
• 2011-2015 International 7300, MaxxForce DT
• 2011-2015 International 7400, MaxxForce 9, 10, DT
• 2011-2015 International 7500, MaxxForce 9, 10, DT
• 2015 International 3000RE, MaxxForce DT
• 2011-2015 International 4300LP, MaxxForce DT
• 2011-2015 International 4400LP, MaxxForce 9, 10, DT
• 2011 International 8500 TranStar, MaxxForce 9, 10
• 2015 International Durastar, MaxxForce 9, DT
• 2013 International Loadstar, MaxxForce 10
• 2015 International Traveler, MaxxForce DT
• 2015 International WorkStar 7300, MaxxForce DT
• 2015 International WorkStar 7400, MaxxForce 9

High Pressure Oil Rail seal kit for a Navistar DT466, Maxxforce DT,9,10 Part# ORS25

These "Tear Drop" design high-flow banjo bolts from TamerX will allow for maximum fuel flow to the diesel fuel injectors for Ford Power Stroke 6.0L and 6.4L diesel engines.
The original banjo bolts on the Ford 6.0L and 6.4L Power Stroke Diesels have a check valve that is redundant. The fuel pressure regulator acts as the check valve. The OEM Banjo bolts cause a restriction in the supply of fuel to the engine. Replacing the original banjo bolts with our updated SK613 bolt kit will improve performance in your engine considerably.

The package contains two (2) upgraded banjo bolts with copper seals.

These extreme flow banjo bolts replace OEM part numbers W302472 (Bolts) W303659 (Washers) and are appropriate for the following applications:

MAKE: Ford
MODELS: Ford F250, F350, F550
ENGINES: Ford Power Stroke 6.0L (2003-2008)
Ford Power Stroke 6.4L (2008-2010)

Warranty: 12 Months Unlimited Mileage

Shipping: Free

TamerX HFCM Water Separator Drain Plug Valve Upgrade- Ford Powerstroke 6.0L Diesel Part# HFCM-DR

This is a HFCM drain valve for a Ford Powerstroke 6.0 Diesel. This fitting allows you to easily drain the HFCM (Horizontal Fuel Conditioning Module) of all water.  

Ford recommends draining the HFCM on a monthly basis. If you are using the OEM fuel filter, it has a special water block media rap that collects the water as it passes through the system.  Once the filter is full, it can no longer trap the water which allows water to start damping your fuel system, especially your very expensive diesel injectors.

This plug is machined from solid brass to eliminate any possibility of corrosion.