Fuel system components

ECm Cooling Plate

OEM#: 5010979R1

This is an OEM ECM Injection System for a International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 11, MaxxForce 13

Diesel Injection Pump

OEM Part Number

4076443RX

This is a factory remanufactured Diesel Injection pump for a Cummins ISC engine.  This is the CAPS System designed by cummins.

Application:

• Make: Cummins
• Engine:  ISC
• Year: 2000-2002

OEM Part#

4002000, 4076443RX

4076443NX

Warranty:

one Year 1,000,000 Miles

Diesel Injection Pump

OEM Part Number

4076442RX

This is a factory remanufactured Diesel Injection pump for a Cummins ISC engine.  This is the CAPS System designed by cummins.

Application:

• Make: Cummins
• Engine:  ISC
• Year: 1998-2002

CPL Numbers this part number was installed on.

2241, 2299, 2481, 2688, 2689, 2690, 2691, 2692,

2693, 2694, 2695, 2698, 2892, 2964, 8001, 8056,

8151, 8152, 8153, 8179, 8264, 8367, 8375, 8088

OEM Part#

4010173,4076442,4076442NX

4076442RX

Warranty:

One Year 1,000,000 Miles

OEM Throttle Valve Kit for 2011-2015 Navistar/International MaxxForce 11, 13

OEM: 5011222R1

This is an OEM  Valve Kit for MaxxForce 11, 13 applications. It is appropriate for the following:

Make: International/Navistar

Model: Prostar

Engine: MaxxForce 11, MaxxForce 13

Year Range: 2011-2015

Warranty: This part carries a warranty of one year with no mileage limitation.

Diesel Injection Pump

OEM Part Number

4076441RX

This is a factory remanufactured Diesel Injection pump for a Cummins ISC engine.  This is the CAPS System designed by cummins.

Application:

• Make: Cummins
• Engine:  ISC
• Year: 1998-2002

CPL Numbers this part number was installed on.

2092

2229

2230

2231

2232

2233

2234

2235

2236

2237

2240

2429

2430

2431

Warranty:

one Year 1,000,000 Miles

Fuel Supply Pump

OEM#: 1891305C94

This is an OEM Fuel Pump from International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 9, MaxxForce 10, and MaxxForce DT engines. Specific application information is below.

This fuel pump fits the following trucks:

• 2011 International 3200, MaxxForce DT
• 2015 International 3300, MaxxForce DT
• 2011-2015 International 4300, MaxxForce DT
• 2011-2015 International 4400, MaxxForce 9, 10, DT
• 2011-2015 International 7300, MaxxForce DT
• 2011-2015 International 7400, MaxxForce 9, 10, DT
• 2011-2015 International 7500, MaxxForce 9, 10, DT
• 2015 International 3000RE, MaxxForce DT
• 2011-2015 International 4300LP, MaxxForce DT
• 2011-2015 International 4400LP, MaxxForce 9, 10, DT
• 2011 International 8500 TranStar, MaxxForce 9, 10
• 2015 International Durastar, MaxxForce 9, DT
• 2013 International Loadstar, MaxxForce 10
• 2015 International Traveler, MaxxForce DT
• 2015 International WorkStar 7300, MaxxForce DT
• 2015 International WorkStar 7400, MaxxForce 9

Diesel Fuel Injector Set & High Pressure Fuel Pump Package for 2008-2010 International/Navistar MaxxForce 13 [Pre-2010 Emissions]

OEM: 3005556C91, 3006220C92

Bosch: 0445120180, 62101006122, 0445020080

This is a brand new set of 6 Bosch diesel fuel injectors and 1 Bosch high pressure fuel pump for 2008 to 2010 International/Navistar trucks equipped with MaxxForce 13 engines.

TamerX Diesel Products stands behind this part package with a one year, unlimited mileage warranty.

These diesel fuel injectors and high pressure fuel pump fit the following trucks:

• 2008-2010 International ProStar, MaxxForce 13
• 2008-2010 International 8600 TranStar, MaxxForce 13
• 2009-2010 International 7600, MaxxForce 13
• 2009-2010 International WorkStar 7600, MaxxForce 13

Diesel Fuel Injector Set & High Pressure Fuel Pump Package for 2009-2010 International/Navistar MaxxForce 11 [Pre-2010 Emissions]

OEM: 3005555C91, 3006220C92

Bosch: 0445120179, 62101006123, 0445020080

This is a brand new set of 6 Bosch diesel fuel injectors and 1 Bosch high pressure fuel pump for 2008 to 2010 International/Navistar trucks equipped with MaxxForce 11 engine. TamerX Diesel Products stands behind this part package with a one year, unlimited mileage warranty.

These diesel fuel injectors and high pressure fuel pump fit the following trucks:

• 2009 International 7600, MaxxForce 11
• 2010 International ProStar, MaxxForce 11
• 2009-2010 International 8600 TranStar, MaxxForce 11
• 2009-2010 International WorkStar 7600, MaxxForce 11

TamerX HFCM Water Separator Drain Plug w/ Integrated Test Port for Ford Powerstroke 6.0L Diesel Part# HFCM-TP

This is a HFCM (Horizontal Fuel Conditioning Module) drain plug for a Ford Powerstroke 6.0 Diesel applications. It is made in USA of solid brass to eliminate any possibilty of corrosion. It is much easier to remove and replace than the OEM drain plug and also features a built-in Schrader valve test port that can be used with a hose and gauge to test for possible obstructions in the fuel system. (Connect a vacuum gauge to the fuel pressure port.If you draw more than 5 inches of vacuum, there is a restriction in the tank.)

Ford recommends draining the HFCM on a monthly basis. If you are using the OEM filter, it has a special water block media rap that collects the water as it passes through the system.  Once the filter is full, it can no longer trap the water, allowing water to start damping your fuel system, especially your very expensive diesel injectors.

Contents:

1- HFCM Drain Plug with Integrated Fuel Rated Schrader Valve

Shipping: Fast, Free USPS shipping

Compatible with the following applications:

Make: Ford

Model: F250, F350, F450, F550 Super Duty

Years: 2003-2007

Engine: Power Stroke 6.0L

High Pressure Oil Rail seal kit for a Navistar DT466, Maxxforce DT,9,10 Part# ORS25

These "Tear Drop" design high-flow banjo bolts from TamerX will allow for maximum fuel flow to the diesel fuel injectors for Ford Power Stroke 6.0L and 6.4L diesel engines.
The original banjo bolts on the Ford 6.0L and 6.4L Power Stroke Diesels have a check valve that is redundant. The fuel pressure regulator acts as the check valve. The OEM Banjo bolts cause a restriction in the supply of fuel to the engine. Replacing the original banjo bolts with our updated SK613 bolt kit will improve performance in your engine considerably.

The package contains two (2) upgraded banjo bolts with copper seals.

These extreme flow banjo bolts replace OEM part numbers W302472 (Bolts) W303659 (Washers) and are appropriate for the following applications:

MAKE: Ford
MODELS: Ford F250, F350, F550
ENGINES: Ford Power Stroke 6.0L (2003-2008)
Ford Power Stroke 6.4L (2008-2010)

Warranty: 12 Months Unlimited Mileage

Shipping: Free

TamerX HFCM Water Separator Drain Plug Valve Upgrade- Ford Powerstroke 6.0L Diesel Part# HFCM-DR

This is a HFCM drain valve for a Ford Powerstroke 6.0 Diesel. This fitting allows you to easily drain the HFCM (Horizontal Fuel Conditioning Module) of all water.  

Ford recommends draining the HFCM on a monthly basis. If you are using the OEM fuel filter, it has a special water block media rap that collects the water as it passes through the system.  Once the filter is full, it can no longer trap the water which allows water to start damping your fuel system, especially your very expensive diesel injectors.

This plug is machined from solid brass to eliminate any possibility of corrosion.

OEM Cummins Diesel Fuel injector Harness Cummins ISBE 5.9L, 2003-2007 Part # 3966805

Cummins OEM Diesel Fuel Rail Supply Line Cummins ISBE 6.7L, 2007.5-2016 Part # 4935980

Cummins OEM Diesel Fuel Injector #6 Line Cummins ISBE 6.7L, 2007.5-2016 Part # 4935976

Cummins OEM Diesel Fuel Injector #4 & #5 Line Cummins ISBE 6.7L, 2007.5-2016 Part # 4935974

Diesel Injection Pump

Harness Upgrade

 Part Number

142-075-0006

Application:

• Make: Cummins
• Engine:  ISC
• Year: 1998-2002

Warranty:

one Year 1,000,000 Miles

Injector Control Valve [ICV]

OEM Part Number: 4089662RX

This is a factory remanufactured Diesel ICV for a Cummins ISC engine.  This is the CAPS System designed by Cummins. This part includes installation gaskets and hardware. It is backed by TamerX Diesel's one year replacement warranty.

Application Information:

Make:    Cummins

Engine:  8.3L & 8.9L ISC

Years:    1998-2002

Warranty:

One year - 1,000,000 Miles (Replacement)

ECm Cooling Plate

OEM#: 3005299C3

This is an OEM ECm Cooling Plate for a International. It is appropriate for 2011-2015 International/Navistar trucks equipped with MaxxForce 11, MaxxForce 13